- Ideal for long lift high speed hoisting applications
- Drum large diameter increases wire rope life
- Precision gearing self-locking reduction oil bath lubricated
- Safety brake automatic mechanical load holding type
- Regenerative lowering electrically retarded lowering speed
- Totally enclosed motor high torque hoist duty motor starting capacity is minimum two (2) times running
- All weather use is ideal for rugged model E4 winches minimum 5 to 1structural safety factor
Unit of Measure
Running Capacity (lbs) |
N/A 6000 |
Line Speed |
N/A 30 FPM |
Standard Wire Rope Diameter |
N/A 1/2 inches |
Drum Diameter |
N/A 8 3/4 inches |
Full Drum |
N/A 815 ft. |
Drum 3-Layers |
N/A 350 ft. |
Motor |
N/A 10 HP |
Winch Width |
N/A 26 inches |
Winch Length |
N/A 57 inches |
Winch Height |
N/A 23 inches |
Net Weight |
N/A 885 lbs. |
Electrical Current |
N/A 230/460-3-60 |
Optional Equipment |
N/A Controls to suit application Grooved drums Overspeed automatic load holding drum brake and electric shut-off Electric Motor Brake (recommended for all hoisting applications) Two or more wire ropes off the drum Slack Line Limit Switch Travel Limit Switch Cable Drum Pressure Roller - assists multiple layer reeving evenly onto drum Mechanical Torque Limiter - automatic reset |
Winch Will Be Used for : |
N/A Electrical Brake Required Lifting Pulling |
Controls |
N/A Lever Drum Mounted at Winch Magnetic Remote Pushbutton |
Mounting |
N/A Horizontal Base Inverted Ceiling Vertical |
|
N/A
|
